5.0
144 votes
|
Post
Send post
............324
Aug 17, 2018
|
#Boku-no-Hero-AcademiaEntonces a esperar, me gustaría saber qué pasó con Deku y que iso el primer portador a este.
Outdoor Blogger
Nov 01, 2022
|
Ice fishing shelters are used to protect people from the elements when they're out on the ice. They can be either temporary, or permanent structures that are built on top of ice holes for long periods of time.
https://outdoorgearreviews.org/best-insulated-ice-fishing-shelter/
https://outdoorgearreviews.org/best-insulated-ice-fishing-shelter/
eSUN 3D
Dec 06, 2022
|
Analysis of the Causes of 3D Printer Resin Cracking Problems
Resin 3d printing materials cracking is mainly divided into the following reasons:
1. The concentration of cleaning agent used in the cleaning process is not enough, and the residual 3D printer resin invades the surface of the printed part, making the surface of the printed part inconsistent with the internal stress, resulting in cracked surface cracking.https://www.esun3d.com/
2. The model has been hollowed out inside, there is a large amount of uncured resin 3d printing materials , and the interior is not completely cleaned with alcohol, or the wall thickness of the model after hollowing out is not enough (less than 3mm), and the thin-walled model will be damaged due to the uncured interior. The stress and the solidified thin wall produce molecular structure pulling, which leads to the overall collapse of the model.
3. Put the 3d printer resin model under a UV lamp of more than 30W for close-range one-way curing for a long time. Excessive secondary curing will cause uneven internal and external stress or inconsistent light reception before and after, resulting in interlayer cracking.
4. Do not blow dry the alcohol after cleaning, let the resin 3d printing materials model dry naturally and place it in the sun to receive light from one direction, forming deformation and cracking caused by strong pulling on the surface and internal stress.
5. Care should be taken when using water washable resin. https://www.esun3d.com/water-washable-resin-product/
Do not wash in water for a long time. After cleaning, dry it with a hair dryer as soon as possible. When storing the water washable resin model, avoid humid and high-temperature environments.
Resin 3d printing materials cracking is mainly divided into the following reasons:
1. The concentration of cleaning agent used in the cleaning process is not enough, and the residual 3D printer resin invades the surface of the printed part, making the surface of the printed part inconsistent with the internal stress, resulting in cracked surface cracking.https://www.esun3d.com/
2. The model has been hollowed out inside, there is a large amount of uncured resin 3d printing materials , and the interior is not completely cleaned with alcohol, or the wall thickness of the model after hollowing out is not enough (less than 3mm), and the thin-walled model will be damaged due to the uncured interior. The stress and the solidified thin wall produce molecular structure pulling, which leads to the overall collapse of the model.
3. Put the 3d printer resin model under a UV lamp of more than 30W for close-range one-way curing for a long time. Excessive secondary curing will cause uneven internal and external stress or inconsistent light reception before and after, resulting in interlayer cracking.
4. Do not blow dry the alcohol after cleaning, let the resin 3d printing materials model dry naturally and place it in the sun to receive light from one direction, forming deformation and cracking caused by strong pulling on the surface and internal stress.
5. Care should be taken when using water washable resin. https://www.esun3d.com/water-washable-resin-product/
Do not wash in water for a long time. After cleaning, dry it with a hair dryer as soon as possible. When storing the water washable resin model, avoid humid and high-temperature environments.
Elvis Estacio
Aug 24, 2018
|
#Boku-no-Hero-Academiame gustó bastante este capítulo ya ví cómo Shinsou utiliza su máscara haora ya quiero ver cómo va a utilizar la cinta plusssssss ultra
Ross Vega
Aug 24, 2018
|
#Boku-no-Hero-Academiaesa mirada! esa convicción de Shinso de convertirse en héroe, y que sabe cuanto tiene que avanzar para estar a la par de ellos ❤
LeshugaXD
Aug 17, 2018
|
#Boku-no-Hero-AcademiaAl parecer Aizawa esta haciendo algo parecido a lo que hace All-Might con Deku y haciendo de orientador a Shinsou
lakerkolya2
Feb 22, 2023
|
I want to share with you a service that employs real personal teachers and Ph.D.s https://dissertation-service.com/buy-dissertation buy dissertation . Do not know what the benefits of the service? This service will allow you to write any written work, including dissertations. By doing so, you will not waste your free time and devote it to your favorite things.
Tokitou-Maki
Aug 19, 2018
|
#Long-Fu-Zhi-Wangdao-Tianxiajum le dijo claro q va a eliminar a kien se meta en su camino ahora si estoy 1000000000%segura q el va aser el villano con el q el prota se va a enfrentar
Report
You have any problems or suggestions, feel free to contact us.
|
Transmit
Submit
@
Emoji
😀
😁
😂
😄
😆
😉
😊
😋
😎
😍
😘
🙂
😐
😏
😣
😯
😪
😫
😌
😜
😒
😔
😖
😤
😭
😱
😳
😵
😠
🤔
🤐
😴
😔
🤑
🤗
👻
💩
🙈
🙉
🙊
💪
👈
👉
👆
👇
🖐
👌
👏
🙏
🤝
👂
👃
👀
👅
👄
💋
💘
💖
💗
💔
❤
💤
💢
Clubs
Load prev page
Load next page
Friends
Load prev page
Load next page
|
Picture
Youtube
Video
Submit
|
Picture
Youtube
Video
Submit
*The format of url is not valid, check and try again please
Emoji
😀
😁
😂
😄
😆
😉
😊
😋
😎
😍
😘
🙂
😐
😏
😣
😯
😪
😫
😌
😜
😒
😔
😖
😤
😭
😱
😳
😵
😠
🤔
🤐
😴
😔
🤑
🤗
👻
💩
🙈
🙉
🙊
💪
👈
👉
👆
👇
🖐
👌
👏
🙏
🤝
👂
👃
👀
👅
👄
💋
💘
💖
💗
💔
❤
💤
💢
Clubs
Load prev page
Load next page
Friends
Load prev page
Load next page
|
Picture
Youtube
Video
Submit
Upload video
Start to upload
*Video type must be MP4
Emoji
😀
😁
😂
😄
😆
😉
😊
😋
😎
😍
😘
🙂
😐
😏
😣
😯
😪
😫
😌
😜
😒
😔
😖
😤
😭
😱
😳
😵
😠
🤔
🤐
😴
😔
🤑
🤗
👻
💩
🙈
🙉
🙊
💪
👈
👉
👆
👇
🖐
👌
👏
🙏
🤝
👂
👃
👀
👅
👄
💋
💘
💖
💗
💔
❤
💤
💢
|
|